No floor joists in 2001 trail-lite 30' tt!
Recently aquired a 30' 2001 trail lite tt. Noticed right away the floor was weak through almost entire high traffic areas. Took off a few metal panels underneath and discovered they made these with no...
Forum Discussion
Matt... I had a similar problem on my 1999 Bantam Hybrid. Only cross members were at front edge, rear edge, and two others... About 4 feet between them over the 13 feet of floor.
I added a few 6 foot pieces of bed frame about 8 inches apart under the soft floor. I notched each end so that there is 2 inches of flat metal laid on top of the original frame on both sides. Worked great for me going on 3 years now. Will surely have to add more in the future.
I added a few 6 foot pieces of bed frame about 8 inches apart under the soft floor. I notched each end so that there is 2 inches of flat metal laid on top of the original frame on both sides. Worked great for me going on 3 years now. Will surely have to add more in the future.
