Forum Discussion
Homeless_by_Cho
Nov 01, 2017Explorer
The design is the same as any kitchen/bathroom cabinet drawer. More than likely, the far inside (front) mounts were not properly installed. If they are too close together, they bind which causes the drawer to be hard to move in and out. If they are too far to one side, the drawer will not close on one side. Mine were OK but the ones in my house needed to be adjusted for being too tight and for only allowing one side of the drawer to be flush with the frame.
LeRoy
LeRoy
About Travel Trailer Group
44,025 PostsLatest Activity: Feb 22, 2025