JRJR wrote:
These drawers seem to go in and out evenly, its just the last 1/2 to 1 inch of being closed that they bind up. Sorta like they were designed to tighten up when fully closed.
I still believe that the front mounts are too close together. As the drawer approaches the front mount, the side rails no longer bow out as they do when the drawer is partially or fully open. Remove the drawer above or below completely and try to wiggle the offending drawer side to side way up front. There should be a little side to side wiggle. If not, adjust the rail(s) slightly open.
LeRoy
