I guess you did not realize I was only joking. I would not want to tackle either and with minimal clearance I can still load the camper. I use a laser to help and I load the camper about an 1" away from the bump out. Then I physically push the camper back so it sits evenly between the wheel wells. I use a board between the camper and the wheel well so it cannot shift into the tailgate frame. It is a big PITA that I do as infrequently as possible. In fact the first time I loaded it, I left the camper on the truck for the next 4 years. Since then I have been removing it at the end of each camping season. I will need to load it in another month before I take off for the Summer and Fall months. I will allow at least an hour. Once I was lucky and backed up perfectly. I thought the laser was magic but unfortunately perfection only happened that one time.