blofgren wrote:
Those latches on your picture frame adapter are much better than the POS ones on my Ram adapter are. These ones have a shear pin on the shaft that shears very easily; as a matter of fact I discovered that the dealership sheared one upon initial installation so it was only secured with 3 initially :E
It may be the angle of your photo, but I think you may have an issue with clearance from the pin box to the front storage box when turning with your fiver connected. Is that an issue?
Brad
Yes! I went up and measured this afternoon. I going to cut the front corners off of the pin box turned up front end. Bikes are going to be a tight fit also.
In this photo you can see the turned up front end for the pin box. trimming the corner at 45 degrees should handle it. Chris
