Forum Discussion
Shadow_Catcher
Oct 22, 2013Explorer
A Very good resource, if a bit opinionated
http://handybobsolar.wordpress.com/
One thing I forgot to mention is that I am also not a fan of holes in the roof and found ABS plastic mounts which I attached with 3M VHB tape. The panel has withstood 140 mph wind speeds with no problem. This was after consulting with a 3M engineer and careful calculations as to necessary surface area and very careful surface preparation.


http://www.tnttt.com/gallery/image_page.php?album_id=803&image_id=83771
http://handybobsolar.wordpress.com/
One thing I forgot to mention is that I am also not a fan of holes in the roof and found ABS plastic mounts which I attached with 3M VHB tape. The panel has withstood 140 mph wind speeds with no problem. This was after consulting with a 3M engineer and careful calculations as to necessary surface area and very careful surface preparation.
http://www.tnttt.com/gallery/image_page.php?album_id=803&image_id=83771
About Travel Trailer Group
44,056 PostsLatest Activity: May 04, 2014