Propride 3P / Jayco Eagle
Hey folks. Wondering if anyone has a picture of a Propride 3P installed on a Jayco Eagle with the fiberglass propane cover installed. I am wondering if there is enough clearance.
Forum Discussion
Just as a follow-up for those reading this thread in the future, I spoke with Sean about the new Jayco TTs. He said that the standard distance for clearance from the center of the coupler is 28", give or take. I measured by clearance up ~18" with the cover popped open (how I use it for every trip), and noted that I only have ~26" of clearance. Sean stated that should not be an issue. I will report back once I have it installed in a couple weeks or so.
Image 1 | Image 2 | Image 3
Image 1 | Image 2 | Image 3
