Putting on Level Bubbles
I need to add the leveling bubbles to my trailer. Would you guys use the floor of the trailer or bumper to set level on to get left/right level and would I use the floor for front/back? whats the best...
Forum Discussion
I would take my level reading from the refrigerator; it is the only thing that seems to care. When the frig is level, I would attach my levels outside by the tongue jack.
In my case, the frame, floor, sink, frig and slide all show slightly different level readings. Therefore, I lay a level on the frame, then I jack the trailer level and do a quick check of the frig make sure it is close.
I am sure there is a bit of frame torqueing when the slide it out or the ground in not really level and the wheels are on blocks.
In my case, the frame, floor, sink, frig and slide all show slightly different level readings. Therefore, I lay a level on the frame, then I jack the trailer level and do a quick check of the frig make sure it is close.
I am sure there is a bit of frame torqueing when the slide it out or the ground in not really level and the wheels are on blocks.
