Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
When you loosened the nuts that were recessed were they REALLY tight?
Was there a lot of galling of the wheel's aluminum lug mating surface?
I have taken mine off several times for various reasons, never seen anything like what you described.
I would call Vision and see what they say.. I would be very wary that the lugs recessed that bad.
The only way they get recessed is by OVER torquing. The shop that did this is going to go into denial mode eh?
My lugs are the same as yours.
Jim
Was there a lot of galling of the wheel's aluminum lug mating surface?
I have taken mine off several times for various reasons, never seen anything like what you described.
I would call Vision and see what they say.. I would be very wary that the lugs recessed that bad.
The only way they get recessed is by OVER torquing. The shop that did this is going to go into denial mode eh?
My lugs are the same as yours.
Jim
