Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
Thanks Jim,
No they were not overly tight almost all the lugs needed to be tightened but when I got to these 2 I new something was wrong after I tried to tighten them and the wrench never "clicked" I thought the stud was stripped so I took the nuts off and that was when I saw what was happening. It was as if the nut sank into the aluminum,I didn't think that could happen. The guy must have been on his cell phone or something. I was using a Snap-on torque wrench by the way.
No they were not overly tight almost all the lugs needed to be tightened but when I got to these 2 I new something was wrong after I tried to tighten them and the wrench never "clicked" I thought the stud was stripped so I took the nuts off and that was when I saw what was happening. It was as if the nut sank into the aluminum,I didn't think that could happen. The guy must have been on his cell phone or something. I was using a Snap-on torque wrench by the way.
