Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
billtex wrote:
Cracks at lug holes = lug centric vs hub centric wheels?
Could be...
No... There should be no recessed milling under the hole! It should be flat just likeAH64ID's post. Check his picture. Mine are not recessed, they are flat just like his.
Jim
