Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
Buzzcut1, Look at the pictures at the beginning of the thread, there is one that shows a nice smooth back with no grooves machined in them,that is how they are supposed to look,those aren't mine. The one with the grooves machined in the back are the ones I got and all 4 are like that. 1 wheel had 2 cracked lug holes that I just happened to see. The wheels have only been on the truck for 2 weeks and I only saw it because I was going to load the camper and I did a walk around the truck. I just got lucky. The last time these wheels were even touched was when they were installed. I only got these for peace of mind. If I have to check them for cracks all the time I will keep my stock wheels,which I put back on the truck. There is almost 1/8" of flange material that has been removed from the back of a wheel that is about 1/2" thick.I want to know why and if that is how they now make them.If so I will sell them as I don't want them.
