Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
Umm I found this post over in the Turbodiesel forum:
http://www.turbodieselregister.com/threads/251026-Lug-Centric-19-5-vision-wheels
Update to what I said previously in this thread I had to order two new front wheels because the el-cheapo clear coat that Vison uses on their machine finish "type 81 heavy hauler" wheels was failing. After 10,000 miles of summer use only. Disappointing to say the least.
Anyhow, the wheels with the failed finish were 3 years old, and were lug-centric (coned lug nuts and loose tolerance on hub hole). The new replacement front wheels are hub-centric (hub piloted) with a flat washer type of lug nut. So it appears that Vision recently changed their design on the wheels.
Interesting.
http://www.turbodieselregister.com/threads/251026-Lug-Centric-19-5-vision-wheels
Update to what I said previously in this thread I had to order two new front wheels because the el-cheapo clear coat that Vison uses on their machine finish "type 81 heavy hauler" wheels was failing. After 10,000 miles of summer use only. Disappointing to say the least.
Anyhow, the wheels with the failed finish were 3 years old, and were lug-centric (coned lug nuts and loose tolerance on hub hole). The new replacement front wheels are hub-centric (hub piloted) with a flat washer type of lug nut. So it appears that Vision recently changed their design on the wheels.
Interesting.
