Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
I have no opinion about wheels in question, but all high-tech mag wheels do have undercut under the bolt holes.
What I have seen on most is the ring cut along as you can see on the picture, but there might be different design.
Point is that wheels stil need some thickness under the bolt and aluminium is not forgiving about multi fold over-torquing like "impact wrench monkey" like to use.
What I have seen on most is the ring cut along as you can see on the picture, but there might be different design.
Point is that wheels stil need some thickness under the bolt and aluminium is not forgiving about multi fold over-torquing like "impact wrench monkey" like to use.
