Question to all Vision 19.5 wheel users
I was doing my pre-camper load up tire pressure ,check lug nuts torque etc. when I came to 2 lugs that didn't seem right. I was not able to get them to spec's. As it turned out it appears that the sho...
Forum Discussion
HMS Beagle wrote:
In reading the thread and looking at the pictures, I kind of figured that retaining washer was what the spot faces were for. The problem with them is that the aluminum surrounding the hole will be loaded in bending stress because the aluminum directly under the nut has been machined away. Normally it would be loaded in compression by the nut. Not a good idea generally speaking, with very careful engineering, attention to fatigue limits, and good controls on exactly how they get mounted and torqued maybe you can get away with it - but here in the real world, not a good idea.
This was my point exactly when I originally posted this,I have since gotten rid of the wheels.
