RAM spare tire tool
Not the jack, I may need the rod you use to lower the spare. With Ford you need a key like thingamajig you place on the end of the crank rod to engage the gear that lowers the tire. Does RAM need one....
Forum Discussion
When you get the rod use it to make sure the hoist isn't bad. Lower it, oil the cable, and raise it back up to make sure that it works.
A lot of them have failed, we replaced them frequently as our shop was near the beach and they rusted sometimes solid.
You also need to inspect the tire for size and age, who knows what is under there. The tire valve should be pointed down so it's pressure can be checked occasionally. You don't need more than one flat at a time.
A lot of them have failed, we replaced them frequently as our shop was near the beach and they rusted sometimes solid.
You also need to inspect the tire for size and age, who knows what is under there. The tire valve should be pointed down so it's pressure can be checked occasionally. You don't need more than one flat at a time.
