peculiar brake situation with Prodigy P3
The short version: My Prodigy P3 is displaying "OVERLOAD - NO BRAKES", but the trailer brakes are still activating. What's the most likely cause, and should I worry? The long version: I hooked up ...
Forum Discussion
Had a similar problem with my last T.T. Had it in the shop for 4 new backing plates and bearing repack. Got it back and everything seamed alright until going to Florida from Wisconsin I lost breaking on 1 side coming down Mt. Eagle. Scary, it would pull to one side. Lucky I had a dually to keep it straight. Found out that when the shop put the new backing plates on a magnet wire got pinched between the plate and the axle flange. Didn't show up until hard braking. Look for anything like this. Also get rid of the scotch locks. Do it right with the proper connections. Good Luck and Happy Camping.
