Rieco Titan swingout jack-need a picture

You will need to take the swing out bolt out from time to time (annually for me) and clean and lube. I use a BRASS wire wheel to clean and polish up. Then coat with garage door lube (seems to work well) reassemble, total time for both, remove, clean, lube, install about 30 min, no tools needed, can remove by hand and install by hand.

I have a pair of Reico-Titan EZ-Swing brackets in like-new condition I can sell at a bargain price, all stainless fasteners included. They were take-offs from my new camper a couple years ago, no longer needed.

jwellsgnr@gmail.com if you're interested.

My AF811 started on a SRW and now sits on a DRW flatbed. Once I knew I was upgrading trucks, I bought and installed these brackets. With the jacks swung forward on my flatbed, I only have 1/2" clearance on either side (you can see the jacks could be fully swung in with the SRW). Although you might be able to "thread a needle" without brackets on a DRW, the chance for damage is too great.

The AF811 comes in a short bed or long bed model. My short bed model sits about 7.5' on my flat bed but is limited to about 7' if you have bed rails and tail lights. My AF811 has every heavy option and comes in about 4000 lbs when wet and loaded. It is within stock RAWR of most 1t trucks but works on 3/4t with some upgrades. We plan to go to larger TC in a couple of years which was the reason our DRW vehicle upgrade.

Bedlam wrote:

Looks like you had the swing-out brackets when you still had your SRW truck. Any particular reason for that? Dirtpig, who replied one above you, mentioned that he has them as well on a SRW. On the flip side, can you get a DRW to fit without the swing-out brackets? I'm still toying with the idea of getting a DRW to fit with my AF811S.

My 811 brackets look exactly the same as yukoners if that helps.

No worries! I get lots of help and info from this site as well:)

Thanks a ton for taking the time to post those pictures. I can see where the hinge would attach to the corner bracket now. Thanks!

These are on our AF 990 hope this helps if you need more give me a pm.