Roof Vent transfers too much light...

Plasti-dip is the best!

Thanks for posting your solution! Let us know if it works for you.

I realize leaving the lid open will let some light in. But, it won't be nearly as bad as the whole white lid acting like a skylight. Plus, what if we leave the lid closed, or even just slightly cracked.

I pulled the lid off and hit it with 3-4 coats of the remainder of Plastidip I had. I held it up to a wall light outside last night and I did not see any light come through. I think this will work for now, or atleast I will test it out and see how I like it.

For those that don't know, this paint requires no prep work and peels off with no damaged left so it's completely reversible.

20150804_182141 by RoyBelluomini, on Flickr

20150804_195740 by RoyBelluomini, on Flickr

Painting the lid, but then leaving the lid open will still let a lot of light in. Unless you only have the lid open a very little bit.

mbutts wrote:
We bought a couple of Vent Cushions. Works well for blocking light and heat.

X2, we like it dark in the bedroom so we can sleep in if we want...

Dr Quick wrote:
On two previous trailers I took the vent lid cover off and got some "Plastic Use" spray paint. Painted the under side black. Worked great, cost about $4.00.

This is what I was thinking, paint the bottom side of the cover black.

On two previous trailers I took the vent lid cover off and got some "Plastic Use" spray paint. Painted the under side black. Worked great, cost about $4.00.

I was seeing if there were other options than the $50-$100 air covers. I do like that I can keep the vents open in the rain though. However, I also don't want to spend the money :). I will check out the dark screen. Maybe that will work.

Wallyworld has smoked cover camco cover for under $30.00. A quick search had those maxx air covers at something like $39.00 if memory serves me correctly.

I think that would help. Use Plast-dip...that way if you don't like it or it doesn't work out for you the way you want, you can just peel off the plastic.

Granted...if the vent is open, it'll still let light in. At least the blacked out vent cover will block out light when closed.

What are the chances I can paint my covers black with some spray paint/plastidip and have similar results?