My NL 10-2 cdse's bumper/ sewer hose compartment will not accept the fitting that's attached. I've been to Wally', C.W., and lots of RV dealers. Inside dimension of bumper is 3 9/16". Out side is 4". I've grinded the fitting's down to make them them fit, but have broken a few when attaching them because the flange, end's up being too thin and not as rigid. I'm probably better off attaching an after market tube under the bumper. What are you guys using. Thanks, K Mac.

My fitting that attaches has a slight angle like the one at the link below. The angle allows the fitting to go in the bumper at an angle. I'm unsure why they decided to do that instead of making the bumper slightly larger. But, it works.http://www.campingworld.com/shopping/item/45-degree-clear-hose-adapter/22169

downtheroad wrote: That looks like what I need. Any link ?

I bought the same thing at Lowe's.It's the 6" PVC fence post with end caps.I recommend fastening it on with Aluminum straps. The plastic ties will break with age and weathering.

I found this brand of hose system and fittings to be more convienent and perhaps a bit smaller due to the design that may work for you.BluelineHad them for years and have not had any issues due to deisgn. I think folks are not sure as they don't look like they will do the job, no so hurky as the other brands. But the slip on off is really fast and secure, no aligning those nubs and twisting with cold wet hands. Hope this helps with your storage issue too.

Sewer Hose Ends/Fittings | Good Sam Community

pjay9
Explorer
Oct 28, 2014
I found this brand of hose system and fittings to be more convienent and perhaps a bit smaller due to the design that may work for you.

Blueline

Had them for years and have not had any issues due to deisgn. I think folks are not sure as they don't look like they will do the job, no so hurky as the other brands. But the slip on off is really fast and secure, no aligning those nubs and twisting with cold wet hands. Hope this helps with your storage issue too.
Joe417
Explorer
Oct 28, 2014
I bought the same thing at Lowe's.

It's the 6" PVC fence post with end caps.

I recommend fastening it on with Aluminum straps. The plastic ties will break with age and weathering.
K_Mac
Explorer
Oct 28, 2014
downtheroad wrote:
That looks like what I need. Any link ?
jimh406
Explorer III
Oct 28, 2014
My fitting that attaches has a slight angle like the one at the link below. The angle allows the fitting to go in the bumper at an angle. I'm unsure why they decided to do that instead of making the bumper slightly larger. But, it works.

http://www.campingworld.com/shopping/item/45-degree-clear-hose-adapter/22169
downtheroad
Explorer
Oct 28, 2014

Forum Discussion

Sewer Hose Ends/Fittings

About Travel Trailer Group

Related Content

Sewer Hose Storage

sewer hose

What length sewer hose?

Sewer Hose Support

Sewer hose replacement