Should I Fix This - Frame Cross Member
While taking a look at the battery wiring and redoing suspect connections, I noticed the front cross member is bent a bit. I have no idea how this would have happened (second owner) and everything els...
Forum Discussion
For the crossmember I would apply some forgetaboutit.
The wires however I would look to get those tucked up in the frame area. Drill a hole and pull them through if needed. Grommet or other protection is needed through the hole.
The wires however I would look to get those tucked up in the frame area. Drill a hole and pull them through if needed. Grommet or other protection is needed through the hole.
