Shurflo 5.7 Pump
I have recently installed the camco hot water bypass and the suction with 3 way valve for the rv antifreeze. I have double checked every thing and every thing is installed correct,and no leaks but I a...
Forum Discussion
Yep back flow is installed correct, there's only one way to inatall it. I was thinking my pumps not got enough pressure to get passed the back flow. You can open the valve outside and watwr blows out and the pump will run. When it runs inside it will run good for a few seconds then ot dies off and no more watwr comes out for a couple minutes then the pump will cycle and run a spell.
