skylight
I have an Aliner camper. One of the skylights has developed a leak. I read the post about which caulk to use. Can you give me any information on how to take the skylight apart? Can I just remove the t...
Forum Discussion
rexlion wrote:lasttruck wrote:
The only problem with Eternabond is that heavy, hard pressure is required to activate the epoxy. This can crack the skylights, leading to more problems.
Thanks for your reply. Have you seen this video on Eternabond's website? rv roof repair They show the tape being pressed down with nothing more than a bare hand "using moderate pressure," according to their instructions.
I haven't found anything on their site that specifies a certain minimum amount of pressure required to activate the adhesive. I certainly would use a roller if I did this fix, but I wonder if some people lean into it with all their weight when in reality much less pressure might suffice?
That is the only one that I have seen that did not use a roller. The adhesive in the initial application is really good and once it makes contact, is not easily removed, thus requiring care.
Using a roller does burst the microsealants and in the other videos, is used.
Without the roller is still better than caulks. With a roller, even much better.
