Slide blows fuze
2017 Forest River Surveyor RKS251. This should be under warranty, but have to haul it 100 miles to repair. So, am searching for help with my problem. The slide (u booth) blows the fuse when being towe...
Forum Discussion
right. On the other question, there is no "best wiring by going to the motor first.... the electricity has to flow thru the whole wire circuit one way or the other. A better "circuit design" would be to run both wires (= and +) to the motor area and have a "relay / control" circuit right there that your slide switch "talks to"... then the wiring at the motor would likely be one heavy gauge and the control / switch wiring would be a lighter gauge. This maybe the setup if there is indeed more than 2 wires going to the motor / controller.
