Slideout stuck out and out of ideas
I am trying to get my slideout in for the winter but have run out of ideas. I have tried on a fully charged battery, and when that did not work I tried manually. Using my drill with a ratchet undern...
Forum Discussion
Several possibilities:
Could be moisture frozen in the motor / gears. Warming with a blow dryer or forced air heater, might help.
You say motor turns, Is that manually or electric?
If motor runs electrically, it could be a shear pin. Here is a link to an article (with pictures)about shear pins.
If motor doesn't run electrically, it could be a short stop breaker. Like this
Could be moisture frozen in the motor / gears. Warming with a blow dryer or forced air heater, might help.
You say motor turns, Is that manually or electric?
If motor runs electrically, it could be a shear pin. Here is a link to an article (with pictures)about shear pins.
If motor doesn't run electrically, it could be a short stop breaker. Like this
