No pictures, but I will start taking a few if you don't mind me sharing them on your thread. I decided to go with the EPDM because most of the leak damage in the middle portion of the TT was from the TPO backing wicking up from staples and screws behind the gutter rail. The laun in the middle top was still good so I cut back 24" on the sides and went right over it with a second layer of 1/4". Figure it is a good for walking and working if nothing else. I still need to clean the old calking of some of the old hardware line vents, rail and the antenna. Gotta replace the sky lite as well, it did not survive extraction. What was your shipping time as I ordered from the same place (adventure) Please share more info on the spring over conversion. It sounds interesting and seems like it would be stronger.
