Stinky Slinky, Where?

We used to carry ours in a PVC pipe setting on the truck bumper retained by three screws in the bottom of the camper. Later I purchased a hose tube at Camping World and a new super hose with the snap on ends, screwed it to camper behind the truck window. We have a wide space there and the old camper already had screw holes from previous owner so no harm. The angled end stores in one of the rear compartments in, a trash bag.

I use a Rhinoflex hose and keep it in a plastic tub along with one of those gizmos you spread out to keep the hose from sagging while dumping and other sewer gear. Got lucky in that the first tub I tried fits perfectly on the hitch haul under the camper overhang. I just throw a bungee across the top to make sure the lid doesn't blow off.

when I used a stinky slinky I used Pres-to-fit? connectors and they went into the standard tubes.
bumpy

mine won't fit in the carrier (rhino flex) so I store it coiled up in the basement near the dump valves.

mkirsch wrote:
Are you trying to ask:

"Where should I store the sewer hose on my newly-acquired truck camper?"

If so, you should specify.

Retired engrish teacher?

Downwindtracker2 wrote:
... I wish I knew how to post pictures, you would have been amused by the previous owners slinky, 1/2 super cheap 1/2 dryer vent duct.

Review the Forum Technical Support thread. It will instruct you on posting photos, and you can practice there. We all like photos.

Wayne

The connectors probably won't fit in a 4" pipe. I think this ad sounds about right. It says it is 4 5/8". http://www.dwincorp.com/products/82/Super-Tube

I'm sorry, my writing skills are usual better than that. My signature is an Australian saying we saw on the back of campers there. Fits us.

We just bought a '98 TC for hunting. We also have a 20' Creekside 20FQ TT. I don't think the DW was too keen on me mudding up the TT hunting. As in, if I was going to take it, she was coming along.

On the TT we use a Rhino slinky, it makes a rather obnoxious chore bearable. Do they fit in 4" pipe?


I wish I knew how to post pictures, you would have been amused by the previous owners slinky, 1/2 super cheap 1/2 dryer vent duct.

THX
Ray

Downwindtracker2 wrote:
Where ? On the TT , I added a 6" pipe under the frame instead of using the bumper. The original owner just coiled it up in one of the outside storage. It was a really cheap one, with a dryer vent added on. It's a '98, so it didn't come with anything better.

In that nice round tube you can see just above the dually's rear fender. Pretty easy to make.

jfkmk wrote:
I believe he HAD a TT, where he stored the hose in a 6" pipe, now he has the TC and wants to know where to store the hose on the TC.

Im just confused on the whole dryer vent thing.

This is what I am thinking.