jmtandem wrote:
OK, I have read this thread on and off for several days.
Its way to deep and hurts my head..
Can someone just tell me "yes or no" please?
Can I go back and reread the OP original post and take that info to the bank? Its correct or no?
Will sure make things easier..
It all depends on whose bank. If it is GM, Ford or Ram's bank it is all about torque. If it is the OP's bank it is about HP.
Short answer YES
I only saw one thing I would differ with the OP.
"Duty cycle goes down as HP goes up."
I suspect in the Class 8 trucks which over the years have increased the hp by a factor of almost 3 that if anything the duty cycle has also gone up. Same for stationary engines used in cruise ships and cargo container ships.
Everything else the OP stated is right on the money from my aspect.
