Thomas Payne move

I found the manufacture of my Sporttrek for my Thomas Payne chairs had not properly installed the chairs. While I was moving them I had to unplug the chairs to get to the back. When I plugged them back in the heater and vibration works but I cannot get the blue accent lights to turn off.

I also noticed that the brick that come with them are different and off by .5 volts, Im not sure that matters (it doesn't).


Update: I have my wires mismatched on the left chair, see my picture for the correct plug-ins on left sectional. This is the setup for the center piece not powered. Plug your power into the green plug and the rest as shown.