Tires rubbing on underneath of trailer
I noticed recently that the tires on the slide out side have been rubbing on the bottom of trailer. It isn't hitting anything but the fabric type weather covering thus far but obviously needs to be co...
Forum Discussion
Thanks to everyone for all the help and suggestions! I have just about decided after going through all the posts, that the springs are shot. The tires are stock size.
I odered 4 2200# springs to replace the 1750# ones. Even though according to the manufactor, I am well below the weight limits I decided a little heavier spring was in order.
I may or may not attempt to do the job. There is a place nearby that quoted about $350 labor to change them and align the axles after. Again thanks to all!
I odered 4 2200# springs to replace the 1750# ones. Even though according to the manufactor, I am well below the weight limits I decided a little heavier spring was in order.
I may or may not attempt to do the job. There is a place nearby that quoted about $350 labor to change them and align the axles after. Again thanks to all!
