Torklift tie downs with Happijac Quick loads?
Will be looking at used truck camper in a week or so, but haven’t had a truck camper in 30+ years (and then bought truck and camper “came along”). Because I have already looked at it and just need ...
Forum Discussion
SideHillSoup wrote:
3/8” rubber mat in the back of the truck, spray in bed liners are not made or should I say were not designed to be used to carry a camper. The camper will slide around with a spray in bed liner, my son in law had one. He now has a rubber bed liner which works far better. I still get a little movement of the camper ( a little) maybe 1/4” to 3/8” but I’m always checking and adjusting my fast guns if required. I find I have to adjust them more when traveling on logging roads, but a good wind will also make Camper adjustments while traveling down the Hwy.
I have Torklift fastguns and love them. No holes in the body of the truck. Yes they cost money, but everything does.
Soup.
Has zilch to do with comparing the Fast Guns to the Quick Loads. Both impact the tie down's not the mounts.
Myself, I'd rather spend a hundred bucks than 400 for basically the same thing. Only difference is they don't say Tork Lift on the handle....lol
