towing w/ camper few ?s
Hello all fellow road gypsies I’ve worked nationwide on the road for over 22 years always in hotels so I’m a gypsie. I’m Steve reside in Alabama I’m at 220’ above sea level. Been using a 02 ch...
Forum Discussion
yes this sounds like are gobberment protecting us in fairness there are protecting porteriey values like.
edit: this campinping w/ the truck camper on my own wet lands, I'm thinking way back in the wetland much less regulated.
the squatting I write of is tempuary while erecting a camping shack.
after crunching the tow capacity # comparing my gtm360 SUV to a 1500 either silverado or a convention express the G360 is twice for the better.
current short plan emphasize on camperizing the vessel w/ completeing the full canvas behind cabin enclosure.
this will like double the inside area of the vessel.
allready have the top of canvas essential for shade, roll down sides would be easy.
I think my plan to reuse some camping equipment on both the TV and the vessel should be considered unrealistic, except for the generater.
so next I makes canvas sides,
what type inzsee glass do you Guys recommend last time I ordered some cheaper chinese stuff I think ordering from them is on hold for a while.
plan on mounting my coleman gasoline 2 burner to the bow next to escape hatch
this is as far away from any fuel fumes located in rear /side of vessel.
edit: this campinping w/ the truck camper on my own wet lands, I'm thinking way back in the wetland much less regulated.
the squatting I write of is tempuary while erecting a camping shack.
after crunching the tow capacity # comparing my gtm360 SUV to a 1500 either silverado or a convention express the G360 is twice for the better.
current short plan emphasize on camperizing the vessel w/ completeing the full canvas behind cabin enclosure.
this will like double the inside area of the vessel.
allready have the top of canvas essential for shade, roll down sides would be easy.
I think my plan to reuse some camping equipment on both the TV and the vessel should be considered unrealistic, except for the generater.
so next I makes canvas sides,
what type inzsee glass do you Guys recommend last time I ordered some cheaper chinese stuff I think ordering from them is on hold for a while.
plan on mounting my coleman gasoline 2 burner to the bow next to escape hatch
this is as far away from any fuel fumes located in rear /side of vessel.
