Vent crank not working
2010 Forest River/Rockwood. Vent only opens an inch or so. Removed plastic bezel. Looks like screen held by 2 screws from top (outside). Even if I remove Maxx Air cover, I couldn't open vent cover to ...
Forum Discussion
On our 2004 Rockwood, you remove the 4 screws holding the plastic frame, as the others have described. Then you remove the screw holding the crank handle and remove the crank handle. Finally, the screen pops out by squeezing in the center at each end to bend the screen plastic frame inward to clear a tab at each end.
Steve
Steve
