Water pump question
Where would I add a winterization kit or use an existing fitting to add antifreeze to my system? Is the white plastic circle to the left of the pump a filter? Thanks
Forum Discussion
Deano_1 wrote:
Is the inlet value to the lower right?
The inlet is after the sediment filter, and should be marked with an arrow in.
You could add a by pass valve (AF kit) a bit before the filter. It may cause a slight restriction in water flow from tank, but many use them without issue.
You can get a screw on fitting, just like the one attached to pump, after the filter. It is easy to use an extra fitting, with whatever length of pex needed to reach AF jug. In this case, just unscrew existing fitting, turn on fabricated fitting/hose, put end in jug.
Jerry
