What Is On The Bottom of Your Truck Camper?
I am in the middle replacing the floor of my truck camper. The original plywood is terribly rotten and, after years of previous owners patching it, it's time to bite the bullet and start over. T...
Forum Discussion
Mine is 3/4" plywood overlayed with waterproof paint and I have 3 roll formed steel channels running parallel with the camper and one across the back screwed into the floor every 1 1/2".
Good luck with adhering a rubber sheet to the bottom. Think I'd just use a bed mat. I like the roll formed channels on the bottom. Keeps the bottom off the pickup floor and allows any rainwater to run out so the floor stays dry all the time.
Downside of the channels are they are slippery but the camper has never moved in the bed. the bed is Rhino Lined.
Good luck with adhering a rubber sheet to the bottom. Think I'd just use a bed mat. I like the roll formed channels on the bottom. Keeps the bottom off the pickup floor and allows any rainwater to run out so the floor stays dry all the time.
Downside of the channels are they are slippery but the camper has never moved in the bed. the bed is Rhino Lined.
