Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
OK
Hi Folks
Back to topic
;-)
At the beginning i was not sure if i should change or renew the isolation.
As soon as i startet taking the inner panels of, i knew it was right.
There where tonns of ants in the isolation.
I was thinking sleeping in there not knowing what is behind those panels.
(disgusting)
Now i have two Questions.
How thick are the Wings Floor, cab over etc, is it wooden board with styrofoam as an isolation?
in which sequence do i have to change the whole wood?
At the beginning my thought was first the wings, than the floor (and the Camper can stay on the jacks.
but whan can i change the front wall underneath the bed?
Hi Folks
Back to topic
;-)
At the beginning i was not sure if i should change or renew the isolation.
As soon as i startet taking the inner panels of, i knew it was right.
There where tonns of ants in the isolation.
I was thinking sleeping in there not knowing what is behind those panels.
(disgusting)
Now i have two Questions.
How thick are the Wings Floor, cab over etc, is it wooden board with styrofoam as an isolation?
in which sequence do i have to change the whole wood?
At the beginning my thought was first the wings, than the floor (and the Camper can stay on the jacks.
but whan can i change the front wall underneath the bed?
