Separation at tie down eye
When I bought my 845 used almost 8 years ago, it had a slight separation at the passenger front tie down eye area. After 70K+ miles on my truck it is much larger. What's the usual "fix" for this? ...
Forum Discussion
Thanks for the good tips. I have my Fastguns adjusted per factory info and maybe even on light side. Don't see similar problems with the other 3.
Will take a look at the propane plastic box and see how hard it is to remove it. A repair like this may exceed my talent/motivation. :) Obviously needs to be done, though.
Thanks,
Ralph
Will take a look at the propane plastic box and see how hard it is to remove it. A repair like this may exceed my talent/motivation. :) Obviously needs to be done, though.
Thanks,
Ralph
Your lucky the removal of the propane cabinet will give you access to the damaged area. I have had three of my tie downs repaired better than new. Dry rot was the culprit by my propane tie downs, as the propane tank storage is not water proof, those vents on the door let in rain or hose water.
