So what did you do to your Truck Camper today?

USMarine0369 wrote:
I made blackout curtains for the bed area along with a vent cover.


Working on the accordian slide cover next.

Nice , i also have a AF 990, Ill be doing the same thing, so could you please post exactly how you made these.

thanks

I made blackout curtains for the bed area along with a vent cover.


Working on the accordian slide cover next.

Backup camera, wireless,
2009 Arctic Fox 990,

Hello,
1- wired the WiFi transmitter into the existing porch light. I enlarged the porch switch to hold two switches so I could turn of the transmitter when not needed. The porch and running lights are located on a panel, there's a cavity behind so easy to install the camera and wires, the switch is directly behind the where camera is mounted.

2- I installed two diodes so to use two 12v inputs for the reverse wire to the backup monitor(or radio). A switch in dash to turn while driving and the reverse wire output wire to backup lights. Without diodes the reverse lights would come on when dash switch is on.

I hope this helps anyone trying to install a backup camera with WiFi.It took me awhile to figure out a clean installation, (my best friend helped me, last name is -Internet, first name is- The) :)

Installed new wheels.

http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/25529082/srt/pa/pging/1/page/303.cfm

I made a stand for my BBq, pretty simple, you can see by the pics how I did it. On a '09 AF-990, uses the bottom ladder mount, 1/4 pins hold in place.


Click For Full-Size Image.

Got tired of repainting my roof again,so bought some 0.020 gage aluminum sheets and glued those on the roof and front sides overlaping the edges..
Will do the whole TC eventualy..
Used the very expensive epoxy adhesive @ 70$ a tube..but its the only glue guaranteed to stick to aluminum..smell same as JBweld stuff,,but needs special caulking gun to apply..




Gluing aluminum is easier and faster then riveting,wonder why Airstream folks dont use it?

That's a cool garage!

Will it still clear once you have the garage door installed?

Took some measurements to make sure she fits, I really can't wait to move in

Loaded the camper up for the first time this year, dewinterized the plumbing, flushed the fresh water system, and installed a new anode in the water heater. Then restocked all the staple foods and hooked up my trailer for the UTV and prepped for the upcoming Memorial day weekend.