3d printed water fill adaptor
I use my 3d printer to create accessories and replacement parts. I designed a water fill adaptor so that the water hose wont keep falling out as I fill the fresh water tank. If you have a 3d printer, ...
Forum Discussion
NMDriver2 wrote:
I use a cut off piece of garden hose about 1 ft long with the female end to screw onto a regular male hose end. I just put the cut end in the fill tube all the way to the connection and it has never come out under pressure. BTW I am pushing 80-90 psi through my hose.
I have always done it this way, and the hose has always blown out of the opening under pressure. I have to stand there and hold it.
I ordered one of these from Print-A-Thing for $14.69 today. (I am the guy who asked how it held onto the opening.)
