3d printed water fill adaptor
I use my 3d printer to create accessories and replacement parts. I designed a water fill adaptor so that the water hose wont keep falling out as I fill the fresh water tank. If you have a 3d printer, ...
Forum Discussion
LittleBill wrote:
Well,
Getting ready for the season. realized i need to sanitize the fresh water tank, realized what a pain that was last time, as I don't have a flexible funnel, so made some changes to the water adapter, and now its hands free pouring, and smaller then then a normal funnel that can go flinging bleach if you let go wrong. ( i always let go wrong).
Guess this will also work, for those who pour antifreeze in here for winterization.
some photo's (needed a slight angle adjustment. already fixed)
the funnel goes into the fill port on this design, to make sure it doesn't drip outside of the fill port
questions, comments let me know.
now thats handy. only problem is I use granular sanatizer, wonder if I could adapt it so the hose is still atached and what ever you put in the funnel just drops on the water sream and gets carried in... now you got me thinking I better finish the up grade on one printer so I can get the other working :B
