SoundGuy wrote:
smcrea wrote:
In the past we have tried all sorts of things to 'blunt' the corners and sharp edges to that the cover doesn't tear. We've used plastic balls to foam. All are a pin to install
Does anyone have any cheap and useful ideas on what to use?
3 covers over 10 yrs, no rips or deterioration at all. I use foam pipe wrap over the gutter extensions and scrap pieces of Reflectix over all sharp corners, both held in place with super sticky Duct tape. Even easier though is indoor storage, as I did last winter. :W
feel your pain but gotta cover up in California weather especially summer, covers only last about three years no matter we try,pain in ... to put on but if ya don't weather destroys them, need to research all manufacturers for a soft inside lining so movement from wind will not rub off finish and it will,good luck
