CUTTING A HOLE IN TT DOOR? {{{{{UPDATES}}}}}}
hey, have a TT that has no window in the door just a peep hole. want to install a window and have to cut out a hole in the door for the window. i did get a used slim shade window w/ shade by AP produc...
Forum Discussion
myredracer wrote:
This is an old thread but for anyone wanting to decide to cut the opening, a Dremel tool will work if you use a 1" fiberglass cutoff wheel. These make really thin cuts, don't create much heat and you can make curved cuts. I use these cutoff wheels for body restoration on a couple of cars I have. A utility knife with a sharp blade might also work well as the door skins aren't much thicker than a beer can.
I love that tall window. I wish our standard type window had clear or tinted glass to let more light in.
Good info, and I have one but never thought of using it, went with the jigsaw. Thanks
