Forum Discussion

Minerrick's avatar
Minerrick
Explorer
Sep 07, 2020

I'm installing rigid insulation on the underbody.....

....of my 2002 Arctic Fox 24.5N FW and I have some questions: When I took the old coroplast off, the bottom of the holding tanks were sagging downward a little, thus causing the coroplast to sag downw...
campigloo's avatar
campigloo
Explorer
Sep 12, 2020
When I got my panels they recommended well nuts. I couldn’t find any locally. I used hollow wall anchors and they’ve worked good. The sheeting on mine is 3/8 chip board. Call the manufacturer and they will probably tell you what’s up there. Three years and ~40k miles and there still very solid.

About DIY Maintenance

RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Dec 11, 2017