Ideas needed for 12v systems if I do 24v
I want to do a 24 volt system so I can use the Magnum MSH4024M Hybrid inverter instead of the MSH3012M. The question is how to power the existing 12 volt stuff. 1) Use an MPPT solar controller to k...
Forum Discussion
Page 32 of the Magnum MSH Hybrid manual talks about the unique feature of these inverters the "Load Support" feature.
If I limited the "Shore" input to 1000 watts and the inverter loads were 1500 watts this Hybrid inverter would use the existing 1000 watts of shore power and combine in 500 watts of battery to output the full 1500 watts. If this extra 500 watts is provided by solar you have not used your batteries.
Load support VDC on the same page is also interesting. If I added another 200 watts of solar this inverter would back off on it's shore power draw possibly allowing the generator in eco mode to throttle down.
Jeff
If I limited the "Shore" input to 1000 watts and the inverter loads were 1500 watts this Hybrid inverter would use the existing 1000 watts of shore power and combine in 500 watts of battery to output the full 1500 watts. If this extra 500 watts is provided by solar you have not used your batteries.
Load support VDC on the same page is also interesting. If I added another 200 watts of solar this inverter would back off on it's shore power draw possibly allowing the generator in eco mode to throttle down.
Jeff
