Ideas needed for 12v systems if I do 24v
I want to do a 24 volt system so I can use the Magnum MSH4024M Hybrid inverter instead of the MSH3012M. The question is how to power the existing 12 volt stuff. 1) Use an MPPT solar controller to k...
Forum Discussion
I was just wondering if the genset power needs to be pure signwave or if it could be a modified signwave?
I have not done any research into these new 'Hybrid' inverters so I have no idea of how that would work.
I'd have to think the genset would have to be an inverter and not an alternator type.
Hey Don, thanks for doing those calc's for me.. :) ..that would be great if it was the only load I have but the Refrig & Freezer (12 VDC) will most likely run about 150 A/H's a day....
I have not done any research into these new 'Hybrid' inverters so I have no idea of how that would work.
I'd have to think the genset would have to be an inverter and not an alternator type.
Hey Don, thanks for doing those calc's for me.. :) ..that would be great if it was the only load I have but the Refrig & Freezer (12 VDC) will most likely run about 150 A/H's a day....
