Installing an Inverter

Last fall I installed an inverter in my rig.

It was a pretty involved process with a lot of prep and planning required because I had to relocate a few things, build a small platform for the inverter and also switch to a shorter range (stove / oven)

I broke the project up in to several videos, starting with showing tools I use for the battery cables and how I built them:

Temco TH0005 Hydraulic Crimper

Building the battery cables

Part 1: Project Planning

Part 2: Battery tray, shunt and fuse mounting

Part 3: AC and DC Wiring

Installing the new Range

Project completion: Color Control GX remote and BMV-712 Battery Monitor