MORryde Step Above Steps

joelabq wrote:
It measured or to 49" required between trailer and object to deploy the stairs. Sorry for the late reply, hope this helps!

Thank You for the measurements

It measured or to 49" required between trailer and object to deploy the stairs. Sorry for the late reply, hope this helps!

ependydad wrote:
If you're concerned about space, why not consider the Torklift Glowstep Revolution steps? Same positive contact to the ground without the wide swing space needed for the fixed MorRyde steps.

X2. Love mine and space is not an issue.

They look like they set at about a 45 degree angle. For a quick and easy measurement I would take the distance from threshold to the ground times 1.4. They will stick out from the trailer when deployed about the same as the height.

joelabq wrote:
I dealt with this last year as I had to replace steps and hated the factory ones. We have a wall on the door side of our backyard access.

I believe it is around 3.5ft to deploy, and then it's ~2ft to the last step.

I can take better measurements for you tomorrow as I simply forgot what it is. Honestly, they are pretty awesome steps and didn't require as much space as I thought. I pretty much just rolled the dice...

That said, first trip out of state with them we ended up in an RV park in Anaheim, CA that had weird pads that almost made any step impossible. For a standard step you could likely just leave them in as the slab was almost to the door. With these MORryde it's deploy or you stay out of the camper. We just had them move us to something standard. never seen that before or since.

I'll try and get measurements of my 4 step version tomorrow for you.

thank you

I dealt with this last year as I had to replace steps and hated the factory ones. We have a wall on the door side of our backyard access.

I believe it is around 3.5ft to deploy, and then it's ~2ft to the last step.

I can take better measurements for you tomorrow as I simply forgot what it is. Honestly, they are pretty awesome steps and didn't require as much space as I thought. I pretty much just rolled the dice...

That said, first trip out of state with them we ended up in an RV park in Anaheim, CA that had weird pads that almost made any step impossible. For a standard step you could likely just leave them in as the slab was almost to the door. With these MORryde it's deploy or you stay out of the camper. We just had them move us to something standard. never seen that before or since.

I'll try and get measurements of my 4 step version tomorrow for you.

Torqlift is so expensive .$540 that the cheapest I found .

If you're concerned about space, why not consider the Torklift Glowstep Revolution steps? Same positive contact to the ground without the wide swing space needed for the fixed MorRyde steps.

neschultz wrote:
That answer depends on the number of steps and how far the adjustable legs are out. Here’s the #2 answer for our 3 step MorRyde unit as it’s sitting in a campground with the legs extended pretty far : 34”. With the legs retracted the #1 answer is 38”

Good Point ,I meant to add that I need the 4 step ...

I stayed at an RV park last year that is designed for over night quick in and out and was great, but the sites were level where the tires are, but sloped up almost immediately to the level of the adjacent row of sites. I saw it reported one time that this step mod would work as long as you had level ground out to as far as your extended slide on that side, but in the case described this wasn't the case. If the ground slopes up almost immediately from the tires it will clear the bottom of the slide, but I just don't see how this step would ever work regardless of the position of the adjustable feet. I know it would not work on the site I'm describing.