water fill cover

It is a one piece gasket and it is very possible that he added it himself. The one mobeewan suggested has the right dimensions and I will probably order that and keep an eye out for a gasket that will fit.

Could he have just added gasket material. Is it one solid piece or a strip spliced together at the ends?

thanks Barney, I think I got it.

mobeewan, that looks as close as anything I've seen yet but still no gasket and I'd like them to be the same - may not be possible but will look.

scout3351 wrote:
Snip...

I've been trying to figure out how to post a picture of the trailer in my profile but haven't got it yet. Will keep trying.

Thanks for the info.

1. Click on "My Forums" at the top of the page up by your name.

2 Click on "My Profile" in the light blue band.

3. Scroll down to the "Your Rig" area and click the "browse" button in the "Rig Picture" section.

4. Select a picture from your computer and double click on it.

5. Go to bottom of page and click on "Submit Changes".

Your done! Your rig picture should show up in all posts. :) You have to make sure your picture meets the forum rules for size which you can find here.
Barney

Maybe this one?

I haven't been to one of my favorite Surplus and camping sites for a while. Not long ago they started carrying RV parts and supplies. Came across it while perusing the RV accessories. It is refered to as a large cable hatch (3 screws on each side). They also have a medium size (2 screws on each side).

Yes,that is exactly what he did. He had a terrible stroke and can't communicate and his wife passed away a few months after we bought the trailer so I can't ask where they bought the cover. We will keep looking.

Looks like the PO added a locking hatch over the existing non locking water fill connection and cap.

Mine has 2 openings through the side of the trailer - one for each tank. When PO removed the tank he made a plate to cover the hole and removed all the plumbing. He added the locking cover on the remaining fill opening. I got the tank when we bought it and reinstalled it. I like the one on ebay but would like to find one with a gasket like the one on the trailer.

I've been trying to figure out how to post a picture of the trailer in my profile but haven't got it yet. Will keep trying.

Thanks for the info.

My TH has two fresh water tanks but only one fill. They are linked by 1.5" pipe. Fill one tank and they both fill, close the valve in the crossover and you can draw from only one. Just sayin since maybe yours was originally the same.

If you put your rig in your profile or signature it makes it easier to answer questions because we then know what you have.

eBay has one similar.

Hatch

Good Luck, Mike