What ga wire do I need ?
I currently have a WFCO 45 amp converter. I have never been happy with it. I have a voltmeter that tells me it is almost always at 13.6 volts. It never drops below that and in 8 years I have only se...
Forum Discussion
I just measured the run, it is 18'
If I want to extend the 6 GA with another piece of 6 Ga, I will probably need to replace my fuse block.
It is a simple 2 sided fuse block with 2 30 amp fuses and is wired completely with 10 Ga.
I am guessing that since one side/wire is connected to the 6 Ga run to the power center, that runs all my 12 volt in the TT.
Since the other side/wire bypasses the 6 GA run and heads back the trailer it is probably for my non fuse panel related items, IE break away braking and co/propane detector ?
I looked online but didn't see anything like the fuse "block" near my batteries. Any suggestions on where to get one ?
If I want to extend the 6 GA with another piece of 6 Ga, I will probably need to replace my fuse block.
It is a simple 2 sided fuse block with 2 30 amp fuses and is wired completely with 10 Ga.
I am guessing that since one side/wire is connected to the 6 Ga run to the power center, that runs all my 12 volt in the TT.
Since the other side/wire bypasses the 6 GA run and heads back the trailer it is probably for my non fuse panel related items, IE break away braking and co/propane detector ?
I looked online but didn't see anything like the fuse "block" near my batteries. Any suggestions on where to get one ?
