2 piece lug nuts

I use only six point sockets on all the lugnuts, trucks, trailers, cars.

rving4us wrote:
Wyotraveler. On a trailer the chrome cover is crimped on, where as your motorhome in like an otr truck with decorative covers over the nut which has to be removed before taking the nut off.

Thanks for info

I replaced mine with these: Lug nuts

3 dog nights wrote:
While on the subject, check your tool box to make sure your wrench/socket/tire iron fit your wheels. I had a flat in NC, and told my wife, no problem, I have a 4 way lug wrench, this shouldn't take but a few minutes. After I got the unit chocked and jacked, I realized the wrench would not fit in the well of the lug. Had to call for roadside tire repair. Did I mention this was on a Sunday afternoon, Thanksgiving weekend? The repair guy shows up and his sockets won't fit either. He had to return to the shop to get another tool box. Guess what I bought Monday morning? 12pt thin wall socket and 1/2" long handled drive. then got a piece of pipe.
Check your tools against your unit,believe me it's cheaper to buy the right stuff first....

I carry my breaker bar, extensions, regular ratchet, speed wrench, sockets for both my wheels (deep and regular) =and= my Companion hitch as well as my torque wrench in their own separate box.

Lyle

While on the subject, check your tool box to make sure your wrench/socket/tire iron fit your wheels. I had a flat in NC, and told my wife, no problem, I have a 4 way lug wrench, this shouldn't take but a few minutes. After I got the unit chocked and jacked, I realized the wrench would not fit in the well of the lug. Had to call for roadside tire repair. Did I mention this was on a Sunday afternoon, Thanksgiving weekend? The repair guy shows up and his sockets won't fit either. He had to return to the shop to get another tool box. Guess what I bought Monday morning? 12pt thin wall socket and 1/2" long handled drive. then got a piece of pipe.
Check your tools against your unit,believe me it's cheaper to buy the right stuff first....

Wyotraveler. On a trailer the chrome cover is crimped on, where as your motorhome in like an otr truck with decorative covers over the nut which has to be removed before taking the nut off.

Typically steel nuts with stainless covers crimped on. Yes, they get loose with age/use, but usually not a problem. If you are using a lug wrench or 6-point socket, the stainless layer gets trapped between the socket and the lug nut, so there's no danger of them "stripping out" where you are only spinning the outer cover and not the nut itself. If they bother you, then get the chrome ones....just be sure to get the right length and seat bevel.

I have found the covers difficult to remove prior to remove the nuts. As said, 1 piece chrome ( Acorn Nuts) can be found almost anywhere including auto parts store. Make sure that the diameter at the large end of the taper fits your rim holes properly. I bought a set where that diameter was slightly too large and they hit the hole diameter before the taper contacted the rim. Heard a thump, thump and 2 broken studs and a wheel that almost fell off.

Thanks everyone.

Aren't those just decorative covers that are removed before using a lug wrench? That is the type on my MH.